Pioneer Automobile Stereo Wiring Diagrams & Shade Codes

For those who’re in search of wiring diagrams and shade codes for Pioneer automotive stereos you’ve come to the proper place. All the information we’re utilizing is from manuals which might be discovered at Pioneer’s official website. Though many of the Pioneer automotive stereos are utilizing the identical wiring diagrams, we advise you to search out the unique guide particularly to your mannequin so that you might be certain you’re utilizing the proper information.

On this article, we’re gonna clarify wiring diagrams for sure automotive radios together with double din Pioneer DMH-100BT and FH-X720BT, and single din Pioneer MVH-S21BT.

Pioneer MVH-S21BT (Single DIN)

16-pin wiring diagrams & shade codes

When connecting the rear and entrance audio system.

Connecting a subwoofer with out the extra amplifier.

6. – 7. – Left entrance speaker: White (+), White/black (-)
8. – 9. – Proper entrance speaker: Grey (+), Grey/black (-)
10. – 11. – Left rear speaker (left): Inexperienced (+), Inexperienced/black (-)
12. – 13. – Proper rear speaker (proper): Violet (+), Violet/black(-)
14. Black (chassis floor) – Hook up with a clear, paint-free steel
location.
15. Yellow – Hook up with the fixed 12 V provide
terminal.
16. Purple – Hook up with the terminal managed by the
ignition change (12 V DC).
17. Blue/white – Hook up with the system management terminal
of the ability amp or auto-antenna relay
management terminal (max. 300 mA 12 V DC).
18. Subwoofer (4 Ω)
19. When utilizing a subwoofer of two Ω,
you’ll want to join the subwoofer to the
violet and violet/black leads of this unit. *Don’t join something to the inexperienced
and inexperienced/black leads.
20. not used
21. Subwoofer (4 Ω) × 2

When utilizing the non-obligatory amplifier.

1. System distant management
2. Hook up with blue/white cable.
3. Energy amp (offered individually)
4. Join with RCA cables (offered
   individually)
5. To rear output or subwoofer output
   Rear speaker or subwoofer

Connections

1. Rear output or subwoofer output
2. Antenna enter
3. Energy wire enter
4. Fuse (10 A)
5. Microphone enter
6. Microphone 3 m (9 ft. 10-1/8 in.)

All information is taken from the manual.

Pioneer DMH-100BT (Double DIN)

Energy wire

1. To energy provide
2. Energy wire
3. Yellow – energy
4. Purple – ignition change (12 V DC) ON/OFF
5. Orange/white – lighting change
6. Black (floor) – to car (steel) physique.
7. Violet/white – Of the 2 lead wires linked to the again lamp, join the one during which the voltage adjustments when the gear shift is within the REVERSE (R) place. This connection allows the unit to sense whether or not the automotive is transferring ahead or backward.
8. Blue/white – Hook up with the system management terminal of the ability amp (max. 300 mA 12 V DC).
9. Gentle inexperienced – ON/OFF standing of the parking brake. This lead should be linked to the ability provide facet of the parking brake change.
10. Energy provide facet
11. Parking brake change
12. Floor facet

Speaker wiring

1. To energy provide
2. Energy wire
3. Left
4. Proper
5. Entrance speaker
6. Rear speaker
7. White
8. White/Black
9. Grey
10. Grey/black
11. Inexperienced
12. Inexperienced/black
13. Violet
14. Violet/black
15. Pioneer FH-X720BT (Double DIN)

All information is taken from the DMH-100BT manual.

Pioneer FH-X720BT (Double DIN)

14-pin wiring diagrams & shade codes

The wiring when connecting a rear and entrance speaker.

Diagram when utilizing a subwoofer with entrance audio system.

6. – 7. – Left entrance speaker: White (+), White/black (-)
8. – 9. – Proper entrance speaker: Grey (+), Grey/black (-)
10. – 11. – Left rear speaker (left): Inexperienced (+), Inexperienced/black (-)
12. – 13. – Proper rear speaker (proper): Violet (+), Violet/black(-)
14. Black (chassis floor) – Hook up with a clear, paint-free steel
location.
15. Yellow – Hook up with the fixed 12 V provide
terminal.
16. Purple – Hook up with the terminal managed by the
ignition change (12 V DC).
17. Blue/white – Hook up with the system management terminal
of the ability amp or auto-antenna relay
management terminal (max. 300 mA 12 V DC).
18. Subwoofer (4 Ω)
19. When utilizing a subwoofer of two Ω,
you’ll want to join the subwoofer to the
violet and violet/black leads of this unit. *Don’t join something to the inexperienced
and inexperienced/black leads.
20. not used
21. Subwoofer (4 Ω) × 2
22. Orange/white – Hook up with a automotive’s illumination wire.
23. Yellow/black (Just for FH-X520UI) – For those who use tools with a Mute perform, wire this results in the Audio Mute lead on that tools. If not, maintain the Audio Mute lead freed from any connections.

When connecting to an amplifier.

1. System distant management
   Hook up with blue/white cable.
2. Energy amp (offered individually)
3. Join with RCA cables (offered
   individually)
4. To rear output
5. Rear speaker
6. To entrance output
7. Entrance speaker
8. To subwoofer output
9. Subwoofer
10. To rear output or subwoofer output
11. Rear speaker or subwoofer

Connections

1. Energy wire enter
2. Microphone enter
3. Microphone (4 m)
4. Rear output or subwoofer output
5. Entrance output
6. Antenna enter
7. Fuse (10 A)
8. Wired distant enter – Laborious-wired distant management adapter can
   be linked (offered individually).

All information is taken from the Pioneer FH-X720BT manual.